After being hitted by the Barracuda's Strong and powerful jaw and sharp teeth, your lures tend to get holes on it and when water gets into your lure it will not float anymore~~~ :(
Floating lure became sinking lure, this is something what i did to fix the floating lure.
First you have to locate the hole "suck it with mouth! lol" I'll just suck the water out from the hole asap before the thing start to rust or whatever.... oh ya wash the lure first la... lol
Or use something to poke the hole bigger untill its big enuff to insert the injection needles (if the holes are too small). Use the injection needles to suck the water out or if you had a empty daiwa-needlenose-reel-oiler it can also suck the water out from the lure
After draining out the water use sandpapper sand the surrounding a bit, drop a little drop of superglue over the hole wait for few sec than take a pcs of papper to spread glue to cover the hole.
If the hole is to big use tiny tiny.... pcs of tissue paper to block the hole up than drop the glue over it.
Wait for it to dry and sand it down with sandpaper. Apply 1 more final drop of superglue make sure the glue don't seap in, let it dry completely before you sand it again.
Sand down the small little Hump FLAT _________
Hope this help
Good luck
Saturday, May 30, 2009
Friday, May 29, 2009
Another 11lb cuda for me this week
On wednesday night we were there again for the cuda's and so are the group of surf anlgers i do not know what they have been catching they were there 3 nights in a roll maybe some catfish i guess ( as they kept shoutting Usat!) their behavior is sick, shoutting and singing like nobody business. Nothing wrong about that in a way....but the place where we were i don't think they should do that and pls clean your stuff before leaving.
Alright nvm about that just enjoy the place while we still can, news will pass from mouth to mouth there is nothing we can do about it.
We started casting about an hour before the maximum tide, not much of bait fish around but there was small tiny fishes along the side of the breaker. Ibr and yuki mondo was using poppers popping very bard but seems like the cuda's are not interested in poppers anymore.
Hmmm the first lure i pick was a funny one, its a weedless rubber rat that i bought from fishingbuddy quite sometime back.
It will be so cute if the cuda's took it hahahaah but sad cuda's are not interested on it or... they are not here yet....
After about 2 hour of hard working nothing seems to be working hahaha, finally i decided to use my fav lure liao.... even i know someone is cursing me at home.
Cursing i lost fish, cursing i lost lure, cursing i had holes on my lures. Hahahaha even there is holes on my lure is not a problem to me as i can fix it with just a few drop of super glue.
Lol i would say his curse quite powerful lor but not strong enuff lol. I got a fish on the yellow top Angel Kiss 115 with slow retrieving. This time the fight was fun finally get to hear my reel screaming again.
Never lost fish , never lost lure only got a deep hole on the Angel Kiss.
It took me quite awhile to release the fish , after that i check if the lure still floats.... hahahaha the ans is NO..... It became a sinking Angel. But no worries i can fix it with a drop of super glue.
11lb Cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Angel Kiss 115
Working method: Slow retrieving
Got to take some rest liao after 9 days in a roll of fishing hahahaha
Alright nvm about that just enjoy the place while we still can, news will pass from mouth to mouth there is nothing we can do about it.
We started casting about an hour before the maximum tide, not much of bait fish around but there was small tiny fishes along the side of the breaker. Ibr and yuki mondo was using poppers popping very bard but seems like the cuda's are not interested in poppers anymore.
Hmmm the first lure i pick was a funny one, its a weedless rubber rat that i bought from fishingbuddy quite sometime back.
It will be so cute if the cuda's took it hahahaah but sad cuda's are not interested on it or... they are not here yet....
After about 2 hour of hard working nothing seems to be working hahaha, finally i decided to use my fav lure liao.... even i know someone is cursing me at home.
Cursing i lost fish, cursing i lost lure, cursing i had holes on my lures. Hahahaha even there is holes on my lure is not a problem to me as i can fix it with just a few drop of super glue.
Lol i would say his curse quite powerful lor but not strong enuff lol. I got a fish on the yellow top Angel Kiss 115 with slow retrieving. This time the fight was fun finally get to hear my reel screaming again.
Never lost fish , never lost lure only got a deep hole on the Angel Kiss.
It took me quite awhile to release the fish , after that i check if the lure still floats.... hahahaha the ans is NO..... It became a sinking Angel. But no worries i can fix it with a drop of super glue.
11lb Cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Angel Kiss 115
Working method: Slow retrieving
Got to take some rest liao after 9 days in a roll of fishing hahahaha
Wednesday, May 27, 2009
Mondo 16lb cuda
LOL this will be a short and easy one as it just happened so fast nothing much to write about. Me ,ibr,mondo and jarrett went to the cuda spot again last night the surf fisher was there too, once we reached the spot mondo made the first cast of the night,
all of us said "wow mondo so fast ar"
within secs mondo had a good take while popping along the breaker with his chug bug, fish just go crazy splashing all over the place and dashed up to the breaker. I try to reach for my grip but it somehow got stuck somewhere on my pouch. ibr quickly took his boga and went down to the breaker and came up with a 16lb cuda.
My jaw almost drop hahahaha first cast hitted a fish and was a 16lb ones song ar!
Congratulation yuki mondo on your 16lb cuda hahaha pls rememeber to keep that chug bug k don't use liao. Go get a new one
16lb cuda on chug bug
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Storm chug bug
Working method: Slow popping
We released the fish alive back to the sea to fight for another day.
The next 2 hours non of us had takes anymore but there are cudas whacking baitfish around.
we leave at 2am
all of us said "wow mondo so fast ar"
within secs mondo had a good take while popping along the breaker with his chug bug, fish just go crazy splashing all over the place and dashed up to the breaker. I try to reach for my grip but it somehow got stuck somewhere on my pouch. ibr quickly took his boga and went down to the breaker and came up with a 16lb cuda.
My jaw almost drop hahahaha first cast hitted a fish and was a 16lb ones song ar!
Congratulation yuki mondo on your 16lb cuda hahaha pls rememeber to keep that chug bug k don't use liao. Go get a new one
16lb cuda on chug bug
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Storm chug bug
Working method: Slow popping
We released the fish alive back to the sea to fight for another day.
The next 2 hours non of us had takes anymore but there are cudas whacking baitfish around.
we leave at 2am
Tuesday, May 26, 2009
The demon has awaken
Finally after so much of hard work i cross the 2kg mark for year 2009 yesterday night. It was a spring down going tide yesterday from 3m to -0.2, Ibr picked me up over my place at around 10.30pm. We were a bit lost on the highway kekeke ibr missed the exit and we got to make a big round. We reach location at the maximum tide and started fishing but there were some surf fisher there earllier then us, becos of them we had some problem on casting our lures, we are unable to make far cast. So no choice the most we can only cast our lures less than 10 meters away from the breakers.
We began to pop around with poppers as on our last few trips they take poppers willingly but non was landed. After but 10 cast a cuda whacked my chug bug very near to the breaker i try to set it but the whole lure fly out of the water hitted onto my shoulder hahaha lucky hook did not when in sia.
i had bad luck at this location everytime i got injured becos of something, rememeber there was a trip i fell and cut my hand lol. i almost broke my arm yesterday hahaha, tell you what happen later part of the story.
About 30mins later when the tide started to change i was popping along the breaker slowly suddenlly "BOOM" the cuda took my chug bug and went off flying here and there, but sad it was a weak one it has no match against my rod. Ibr went to grip the fish up for me and wow it was a 11lb cuda. The grip somehow give way cuda droped and roll down the break but lucky ibr safe it from rolling into the water.
Thanks bro its was a close one.
11lb cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Storm chug bug
Working method: Slow popping
I try to release the cuda about 15 to 20mins but the fish could not make it anymore so we gave the fish to the surf fisher.
Yes la finally kekekeke
We moved around the area but no sign of fishes 20mins later we went back to the first location where i hitted the first cuda. Moments later we saw a huge splash in front of us,our cuda king standing next to us using the Black Angel Kiss 115 had a good sized cuda on. The fight was so much better compared to mine, it took a few good run before SH manage to pull it up to the side of the breaker.
The cuda look small when it was still in the water but when the fish is out of the water "WOW"
12lb cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa freams kix 2500
Line: Pe 2 casting PE
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Angel Kiss
Working method: Slow retrieving with twitch
Luckly we manage to release this cuda alive safely back to the sea
We went off at around 2 plus as ibr got to work this afternoon, on the way moving out from the breaker i fell, my arm hit the ground first but lol was lucky i did not break my arm only a few cuts here and there. Now my arm and butt still very the pain........:X
We began to pop around with poppers as on our last few trips they take poppers willingly but non was landed. After but 10 cast a cuda whacked my chug bug very near to the breaker i try to set it but the whole lure fly out of the water hitted onto my shoulder hahaha lucky hook did not when in sia.
i had bad luck at this location everytime i got injured becos of something, rememeber there was a trip i fell and cut my hand lol. i almost broke my arm yesterday hahaha, tell you what happen later part of the story.
About 30mins later when the tide started to change i was popping along the breaker slowly suddenlly "BOOM" the cuda took my chug bug and went off flying here and there, but sad it was a weak one it has no match against my rod. Ibr went to grip the fish up for me and wow it was a 11lb cuda. The grip somehow give way cuda droped and roll down the break but lucky ibr safe it from rolling into the water.
Thanks bro its was a close one.
11lb cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa caldia kix 2500
Line: ygk power hunter Pe 2
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Storm chug bug
Working method: Slow popping
I try to release the cuda about 15 to 20mins but the fish could not make it anymore so we gave the fish to the surf fisher.
Yes la finally kekekeke
We moved around the area but no sign of fishes 20mins later we went back to the first location where i hitted the first cuda. Moments later we saw a huge splash in front of us,our cuda king standing next to us using the Black Angel Kiss 115 had a good sized cuda on. The fight was so much better compared to mine, it took a few good run before SH manage to pull it up to the side of the breaker.
The cuda look small when it was still in the water but when the fish is out of the water "WOW"
12lb cuda
Rod: G-loomis GL2 6-12lb 6''
Reel: Daiwa freams kix 2500
Line: Pe 2 casting PE
Leader: Triumph fluorocarbon Shock Leader 30lb
Lure: Angel Kiss
Working method: Slow retrieving with twitch
Luckly we manage to release this cuda alive safely back to the sea
We went off at around 2 plus as ibr got to work this afternoon, on the way moving out from the breaker i fell, my arm hit the ground first but lol was lucky i did not break my arm only a few cuts here and there. Now my arm and butt still very the pain........:X
Monday, May 25, 2009
Saturday night FW3 gathering
Meet up with AG,TT,SH and ham at pasir ris mrt station, from there we shared cab into FW3. We reach fw3 at about 7.45 if i'm not wrong hahaha Soon more and more poeple came to join us even jarrett came last min,after setting up everything We started our BBQ.
After the food and drinks Necro started to perpare our baits we got 4kg of fresh hum kekeke
We started fishing at about 10.30pm necro's brother got the first fish of the night on our trip
Soon a few cats joined us in our party and thats all for the night lol everything die down untill the next morning.
What is momok doing?....
Nvm that lol this is what in return a small CPC
I lost a big cats before Necro ,TT and AG leave , hai... hook came off sian....Total i lost 3 fish in the morning......... Before me and the SH gang wen off The lucky guy got this nice cats last min....
Me sh and ham went to pasir ris mrt station for breakfast the $1.80 chichken rice ! then went home to sleep.
lol sunday night me and mondo chiong again for eging but catch was no good only manage to land 2 by mondo i am so tired after that lol
After the food and drinks Necro started to perpare our baits we got 4kg of fresh hum kekeke
We started fishing at about 10.30pm necro's brother got the first fish of the night on our trip
Soon a few cats joined us in our party and thats all for the night lol everything die down untill the next morning.
What is momok doing?....
Nvm that lol this is what in return a small CPC
I lost a big cats before Necro ,TT and AG leave , hai... hook came off sian....Total i lost 3 fish in the morning......... Before me and the SH gang wen off The lucky guy got this nice cats last min....
Me sh and ham went to pasir ris mrt station for breakfast the $1.80 chichken rice ! then went home to sleep.
lol sunday night me and mondo chiong again for eging but catch was no good only manage to land 2 by mondo i am so tired after that lol
Thursday, May 21, 2009
gathering this coming weekend
Ok guys gathering this coming weekend will be at FW3.
we will meet up at 8pm FW3
Plan B
FW3 BBQ cum fishing
List
1.AC
2.AG
3.TT
4.YUKI MONDO
5.HAM BOY
6 anathan
7.SH
8.jurongboii
10.airman (to be confirm)
11.sticko
we will meet up at 8pm FW3
Plan B
FW3 BBQ cum fishing
List
1.AC
2.AG
3.TT
4.YUKI MONDO
5.HAM BOY
6 anathan
7.SH
8.jurongboii
10.airman (to be confirm)
11.sticko
3 smiley cuda
We lost 3 smiley cuda last night hai....
I made a wrong selection of rod and lures to use lol. i had a cuda on my first cast last night , the fight lasted for about 20 secs only. Taken on my yo-zuri hydro popper 43g, hook did not penetrate properly into mouth might be due to the thick hook and soft rod.
I feel lucky that my lure came back but with holes all over it. Moments later mondo also had a fish on rod bend like hell , he started to shout " baby i'm not going to let you go!" hahaha but thing did not go as he wished the cuda cut the leader and took his white chug bug . sad.... yuki mondo
The 3 rd cuda we lost was by jarrett i passed the hydro popper to him within a few cast "bomb" another cuda was on but sad thing was the same thing happened hook did not went in properly . We lost 3 cuda in about 45mins sad...... all are above 3 to 4kg!
WE WILL BE BACK!!!
I made a wrong selection of rod and lures to use lol. i had a cuda on my first cast last night , the fight lasted for about 20 secs only. Taken on my yo-zuri hydro popper 43g, hook did not penetrate properly into mouth might be due to the thick hook and soft rod.
I feel lucky that my lure came back but with holes all over it. Moments later mondo also had a fish on rod bend like hell , he started to shout " baby i'm not going to let you go!" hahaha but thing did not go as he wished the cuda cut the leader and took his white chug bug . sad.... yuki mondo
The 3 rd cuda we lost was by jarrett i passed the hydro popper to him within a few cast "bomb" another cuda was on but sad thing was the same thing happened hook did not went in properly . We lost 3 cuda in about 45mins sad...... all are above 3 to 4kg!
WE WILL BE BACK!!!
Wednesday, May 20, 2009
Mini PBs this morning
Went to lsr with mondo and ibr early in the morning but there were 3 china man earlier then us ,as usual they were the pro baiters wannabe lol pattern morn than badminton. Makes me feel like they are trying to tell us that they had fish at the end of the line. Best of all they can't cast properly and never look back before they cast lol me and mondo also almost got hooked this morning. Anyway the baiters had about 15 table sized pb , all were kill and bagged. hai.....
3 of us only had about 10 mini ones after a lot of hard works. nowadays PBs are smarter then i tot hahaha.
Later tonight i'll be going for cuda kekeke wish me la bro hope i can break the 2kg mark tonight hahaha
3 of us only had about 10 mini ones after a lot of hard works. nowadays PBs are smarter then i tot hahaha.
Later tonight i'll be going for cuda kekeke wish me la bro hope i can break the 2kg mark tonight hahaha
Tuesday, May 19, 2009
Weekend gathering
Ok guys we are planning for a gathering this coming weekend, TT will be going to NS soon so not much time to fish with him liao. Pls drop your name here if you are interested
Plan A
Illegal camping at lab park cum fishing and mini BBQ
Cost sharing for food and stuff
Plan B
FW3 BBQ cum fishing
List
1.AC
2.AG
3.TT
4.YUKI MONDO
5.HAM BOY
6 anathan
7.SH
8.jurongboii
10.airman (to be confirm)
11.sticko
Plan A
Illegal camping at lab park cum fishing and mini BBQ
Cost sharing for food and stuff
Plan B
FW3 BBQ cum fishing
List
1.AC
2.AG
3.TT
4.YUKI MONDO
5.HAM BOY
6 anathan
7.SH
8.jurongboii
10.airman (to be confirm)
11.sticko
Aluminium offshore pliers
My birthday gift from mondo and ibr ( thanks a lot bro)
Aluminium with color anodize finish
about 170gm
PE/braid line cutter
replaceable Parts / cutter that can cut braided lines. require some maintenance when used in saltwater thats for sure. Replaceable Parts might be available soon
btw the pliers are available at Hotspot and fishingbuddy
after a couple high profile companies like Fisherman,Accurate etc... entered the market in premium pliers, many more suppliers have hoped to duplicate their success. Chinese manufacturers, picked up on the trend and made some good product
The original By Accurate
They look almost the same
Aluminium with color anodize finish
about 170gm
PE/braid line cutter
replaceable Parts / cutter that can cut braided lines. require some maintenance when used in saltwater thats for sure. Replaceable Parts might be available soon
btw the pliers are available at Hotspot and fishingbuddy
after a couple high profile companies like Fisherman,Accurate etc... entered the market in premium pliers, many more suppliers have hoped to duplicate their success. Chinese manufacturers, picked up on the trend and made some good product
The original By Accurate
They look almost the same
Monday, May 18, 2009
Little IKA night
Went eging with yuki mondo last night catch was still quite ok... but all are small ones. It could be better if we were there 1 week before hahaha
total we had 6, 3 for me and 3 for mondo.
Mondo had a bouns catch last night lol , a small cute little bat tat got itself stuck on his line. we spend about 15mins to safe the bat free.
Today got to take some rest liao very tired after chionging so many days to fishing lol
total we had 6, 3 for me and 3 for mondo.
Mondo had a bouns catch last night lol , a small cute little bat tat got itself stuck on his line. we spend about 15mins to safe the bat free.
Today got to take some rest liao very tired after chionging so many days to fishing lol
Subscribe to:
Posts (Atom)